Browse
 
Tools
Rss Categories

HP CLJ CM6030, 6040 Multipurpose drive unit removal

Author: Metrofuser Tech Support Reference Number: AA-05875 Views: 4171 Created: 09-23-2013 03:00 pm Last Updated: 09-23-2013 03:00 pm 0 Rating/ Voters

1      Remove the following:

         Fuser

         Secondary transfer unit

2      Remove one screw (callout 1) and release the door hinge (callout  2)

3        Remove two screw(callout  1) and the handle.

4        Remove two screws(callout 1), release two tabs(callout 2, and then remove the right inner cover.

5        Lift the secondary transfer unit stopper (callout 1), and then pull it forward to remove it .

6       Release the two tabs ( callout  1), and then slide the gear cover (callout 2 ) in the direction indicated

          to remove it.


7 Remove two connectors (callout 1), one wire retainer (callout 2), and one ground screw (callout 3).

8      Remove two screws (callout 1), two pins (callout 2), and then remove the multipurpose tray drive unit (callout  3)