Browse
 
Tools
Rss Categories

HP CLJ CM6030, 6040 Removing the Multipurpose drive unit

Author: Metrofuser Tech Support Reference Number: AA-05852 Views: 5618 Created: 09-23-2013 11:52 am Last Updated: 09-23-2013 11:52 am 0 Rating/ Voters

1      Remove the following:

         Fuser

         Secondary transfer unit.

2      Remove one screw(callout 1) and release the door hinge( callout 2).

3     Remove two screws (callout 1) and the handle.

4   Remove two screws (callout 1), release two tabs(callout 2), and then remove the right inner cover.

5   Lift the secondary transfer unit stopper (callout 1), and then pull it forward to remove it.

6    Release the two tabs (callout 1), and then slide the gear cover(callout 2) in the direction indicated to remove it.

7   Remove two connectors (callout 1), one wire retainer(callout 2), and one ground screw(callout 3).

8    Remove two screws(callout 1), two pins (callout 2 ), and then remove the multipurpose tray drive unit (callout 3).