Rss Categories

HP CLJ M6030,6040 Optical scanner removal

Author: Metrofuser Tech Support Reference Number: AA-05851 Views: 10200 Created: 09-23-2013 11:52 am Last Updated: 09-23-2013 11:52 am 0 Rating/ Voters

The HP color laser jet cm 6040 mfp has a 100 sheet multipurpose input tray, print 40 pages per minute has two 500 sheet input trays, a automatic document feeder

that holds up to 50 pages.  IT has a hp jet direct embedded print server for connecting to a 10/100 base TX network,  it come with 512 megabytes of random access

memory, a hard drive and duplexer.  With speeds as fast as 40 pages per minute the HP Laser jet CM6030 / CM6040 is a copier series worth keeping an eye on.

At this time, it appears that the cost per print is a tad high on this device, but the image quality and reliability seem to be good.     The HP Colour LaseJet cm6040 printer is created to get the maximum performance from a printer with regards to colour and non colored documents printing.  Getting premium quality prints working with varied media is usually a hard activity but HP engineering guarantees attributes which have been well- examined in the lab.   The HP cm6040 facilitates multi-tasking and also have capabilities for example white and black fax, copy, digital send, print, and scan. They are typically the functions which will make an all-in-one printing device rather flexible. Nevertheless, you will discover only a couple of manufacturers that create highly efficient multi-function printing devices. For any A4 paper kind, the typical monthly duty cycle is actually around two hundred thousand pages. By using utilizing generic affordable ink, extra financial savings for each page of printed records and documents is attainable. Complex printing tasks are covered in the printer as a result of the 512 MB built-in memory. The 835 Mhz microprocessor is definitely the mastermind responsible for all the printers abilities. The key concerns about HPCM6030 are components that jam at occasions and consumables that happen to be noticed as too pricy. There are reported replacement automated document feeder and scanner assembly within the warranty timeframe. Though components are honestly topic to deterioration, it seemed that these malfunctions happened too soon for that CM6040. One possible cause for the breakdown is the fact that consumers seem to be demanding the device on its limits. You'll find occasions when customers fail to comply with right operational methods. In the long term, this failure may very well be the cause of most of the difficulties.  For  the removal of the Optical scanner assembly here are the following steps. this procedure requires two people to lift the optical scanner.  To reduce the weight of the optical scanner, remove the ADF.    1   Remove the following:   Duplex switchback,  Face down output bin, front lower cover, inner cover, rear scanner, right upper cover. 2  Lock the wheels and scanner of the product and open the right door. 3  Open the front door and locate the small front internal cover (callout 1). to remove the cover release the tab (callout 2 ) upwards.  Disconnect one connector (callout 3)

4   From the front of the scanner, remove one screw ( callout 1), and then remove one large pin (callout 2

5  from the left side of the scanner, remove two screws (screws are captive and stay with the pins) ( callout 1) , remove two small pins ( callout 2), and then remove one

     ground screw ( callout 3).

6   From the rear of the scanner, remove one screw (callout  1), remove one large pin ( callout 2 ) and then disconnect two connectors (callout 3 )

7   Disconnect one connector (callout1), and then release the cable from the two retainers (callout 2)

8   Lift the optical scanner off the product.

When replacing the optical scanner, you may need to add jumpers to the SCB and perform a firmware update, The jumpers are included with the  optical scanner.

When reinstall, enter the calibration value into the control panel, the calibration value is found on the back of the product as shown.