Browse
 
Tools
Rss Categories

HP LJ P3015 removing tray 2 , and tray 1, pickup solenoid

Author: Metrofuser Tech Support Reference Number: AA-05554 Views: 21175 Created: 07-10-2012 04:50 pm Last Updated: 07-10-2012 04:50 pm 0 Rating/ Voters

1         Before proceeding, remove the following components

           DIMM cover

           Formatter cover

           Rear door assembly

           Left cover

           Top right cover

           control panel

           Front right cover and side cover assembly

           Lower  right  cover

           Power switch assembly

           Engine control unit

2        Release the wire harness from the guides ( callout 1) and then remove three screws ( callout 2)

          

3     Carefully unwind the wire harness (callout 1) from the retainer on the gear cover (callout 2 ) and then remove the cover

4     For the cassette (tray 2)  pickup solenoid:   Remove one screw 9 ( callout 1) and then  the solenoid ( Callout  2)

       For the tray 1 pickup solenoid:   Remove one screw (callout 3 ) and then remove the solenoid