Browse
 
Tools
Rss Categories

HP LJ M3027 M3035 feed-guide assembly removal

Author: Metrofuser Tech Support Reference Number: AA-05500 Views: 4898 Created: 06-26-2012 05:28 pm Last Updated: 06-26-2012 05:28 pm 0 Rating/ Voters

1   Remove the following components

     All of the cover

     Fax accessory

     Disk drive

     Formatter

     stapler

      ECU

      Left side riser

      Access plate

     Fuser

     Oblique roller assembly

     Left side fan

     High voltage power supply

2  Lift one non captive grounding spring out  of the device

3  Loosen the grounding wire from the routing guides

4  Remove two screws (callout 2).


5   on the edge of the assembly that is farthest from you, lift the right corner up, twist the assembly counterclockwise, and remove the assembly from the device..