Browse
 
Tools
Rss Categories

HPlaserjet M600, 601, 602 SSM firmware upgrade

Author: Metrofuser Tech Support Reference Number: AA-05410 Views: 23264 Created: 06-04-2012 05:01 pm Last Updated: 06-04-2012 05:01 pm 0 Rating/ Voters

1  Turn the product on. The Message error 99.09.67 disk not bootable appear on the control panel display.  Press the OK button to continue.

2   Wait for the preboot menu to appear on  the control panel display, and then press the down arrow button to scroll to administrator. press

      the ok button to select it

3   Press the down arrow button to scroll to download . Press the OK button to select it.

4   Press the down arrow button to scroll to USB thumbdrive.  Press the ok button to select it

5   Several .bdl files might be listed, Press the down arrow button to scroll to the firmware upgrade file that you downloaded earlier. Press the ok button

      to select it.     ( IF no .bdl files are listed, try saving the file to a different USB storage accessory)

6   Wait while the file transfer. When the transfer is complete, the message COMPLETE appears on the screen

7    Turn the product off, remove the USB storage accessory, and then turn the product on. Wait for several minutes while the product initializes.