Browse
 
Tools
Rss Categories

[Binname] full

Author: Reference Number: AA-03663 Views: 1773 Created: 05-24-2011 09:42 am Last Updated: 05-24-2011 09:42 am 0 Rating/ Voters

The specified bin is full and must be emptied for printing to continue. This is a warning if a job is not pending for output to the full bin. When a job is sent to the full bin, it becomes an error.  Empty the bin to continue printing. If the bin is empty, check that the tray full sensor flag  moves freely. Reseat connector J901 on the face down delivery PCA, and connector J821 on the DC controller.