Rss Categories

Insufficient memory to load fonts/data [device]

Author: Reference Number: AA-03036 Views: 3320 Created: 03-17-2011 01:44 pm Last Updated: 03-17-2011 02:56 pm 0 Rating/ Voters

To continue touch OK. The printer does not have enough memory to load the data, such as fonts or macros from the location specified. [DEVICE] can be one of the following. INTERNAL= ROM directly on the formatter board. CARD SLOT X = font card in slot X DIMMs.  Internal disk = Non-removable hard disk(other than EIO).   EIO X disk = removable hard disk installed in EIO slot X. External source # or USB device X - USB fonts.

To use the device without the data, press SELECT. To solve the problem add more memory to the printer. DDR 200 pin SDRAM Memory: 128MB (Q7721A) or 256 MB (Q7222A) or 512MB(Q7723A).