Rss Categories

Insufficient memory to load fonts/data [device]

Author: Reference Number: AA-01709 Views: 3216 Created: 12-02-2010 09:53 am Last Updated: 12-02-2010 09:53 am 0 Rating/ Voters

The device does not have enough memory to load the data, such as fonts or macros from the location specified. [DEVICE] can be one of the following. INTERNAL= ROM directly on the formatter board. CARD SLOT X = font card in slot X.  External source #, INTERNAL DISK, DIMMS, USB device X, EIO X disk = removable hard disk installed in EIO slot X.

to use the device without the data, press SELECT. To solve the problem add more memory to the printer. DDR SDRAM Memory: 128MB (Q2630A) or 256 MB (Q2631A).